Curing & Sealing Compounds

DRESS & SEAL is a sprayable, acrylic copolymer that cures and dustproofs concrete.

DRESS & SEAL 30 is the highest solids version of our popular DRESS & SEAL products.

DRESS & SEAL WB 25 formulation is a water-based, low VOC, 25% solids acrylic copolymer solution that cures, seals and dustproofs concrete.

LION HARD is a low VOC, environmentally friendly lithium silicate concrete floor densifier, hardener, and sealer.

LUMISEAL FX is a high solids, water-based, non-yellowing, blush resistant curing and sealing compound.

LUMISEAL PLUS is a solvent based, non-yellowing, blush resistant curing and sealing compound.

PERMAGUARD SPS is the answer to the common floor staining problems of concrete, stone, marble and terrazzo surfaces due to spillage and penetration of varied common contaminants found in grocery complexes, school cafeterias and restaurants.

L&M CURE W is an emulsified wax, concrete curing agent that cures the concrete by forming a barrier against moisture loss.

DRESS & SEAL WB family of formulations are water-based, low VOC, acrylic copolymer solutions that create a permeable membrane to aid in curing and dustproofing of freshly poured concrete. 

L&M CURE is a low VOC, ready to use, non-residual concrete curing compound.

E-CON is a concentrated, odorless, water-based polymer liquid that, when placed on fresh concrete, helps to control the rate of evaporation and extend workability.