CHEM HARD chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create, chemically resistant surfaces.

PERMAGUARD SPS is the answer to the common floor staining problems of concrete, stone, marble and terrazzo surfaces due to spillage and penetration of varied common contaminants found in grocery complexes, school cafeterias and restaurants.

LUMISEAL FX is a high solids, water-based, non-yellowing, blush resistant curing and sealing compound.

DRESS & SEAL WB 25 formulation is a water-based, low VOC, 25% solids acrylic copolymer solution that cures, seals and dustproofs concrete.

170.5 Sound & Crack Isolation Mat is a high performance anti-fracture / sound and crack isolation membrane designed to be used under thin-bed adhesive for interior floor installations of ceramic tile, marble, stone and brick to reduce the transmission of impact noise and help provide soundproofing between floors and isolate cracks in the substrate.

EPOGROUT 758 is a three-component, flowable, epoxy-based grout that produces high performance strength and chemical inertness.

As of July 2022, LATICRETE® SUPERCAP® Moisture Vapor Control is no longer available and is being replaced by VAPOR BAN™ E. Expect the same great performance with a new updated look.

Moisture Vapor Control is a single-coat, 100% solids, liquid applied 2-part epoxy coating specifically designed for controlling the moisture vapor emission rate from new or existing concrete slabs.

The STRATA_HEAT™ Thermostats are dual voltage 120V/240V and simple to use; the STRATA_HEAT Programmable Thermostat is a digital programmable thermostat and the STRATA_HEAT Wi-Fi Thermostat can be controlled through smart phone technology.

Older models soon to be discontinued, for the new versions, click below.

STRATA_HEAT Smart LCD Thermostat

STRATA_HEAT WiFi Thermostat

HYDRO BAN Linear Drains are low profile linear floor drains specifically designed for bonded waterproofing installations with HYDRO BAN waterproofing membranes.

170.5 Sound & Crack Isolation Mat is a high performance anti-fracture / sound and crack isolation membrane designed to be used under thin-bed adhesive for interior floor installations of ceramic tile, marble, stone and brick to reduce the transmission of impact noise and help provide soundproofing between floors and isolate cracks in the substrate.

Now built with Microban® Antimicrobial Technology! This water-based penetrating sealer provides advanced stain and antimicrobial protection, while preserving the natural look of the surface.

HYDRO BAN Adhesive & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.