SPARTACOTE™ Moisture Mitigation

DRYTEK MVB Moisture Mitigation

High moisture in the slab and associated moisture vapor transmission is one of the leading causes of resinous flooring issues and failures. LATICRETE® recommends for protection against moisture vapor or when the relative humidity (RH) in the concrete measures 75% or greater to use LATICRETE VAPOR BAN ER or SPARTACOTE™ Moisture Vapor Barrier as your base coat (primer) in all SPARTACOTE systems.

Save a step in your installation process by pigmenting using SPARTACOTE Epoxy Pigments and broadcast directly into the wet resin. 

 
DRYTEK MVB Moisture Mitigation

Estimate your project today with the LATICRETE Project Estimator 

Compare Moisture Mitigation systems
Product Surface Preparation Number of Coats Overall Thickness (DFT) Features
VAPOR BAN™ ER Mechanically profile to a CSP-3 1 16 mils 
(for all systems)
- Re-coat in as little as 3-4 hours
- Pigmentable with SPARTACOTE Epoxy Pigments
- Accepts Broadcasts of SPARTACOTE Blended Chip (Flake) or Quartz
- Exceeds ASTM F3010 (<0.1 perms at 16 mils)
SPARTACOTE™ Moisture Vapor Barrier  Mechanically profile to a CSP-3  1  12 mils
(for GUARD or METALLIC systems)

16 mils 
(for CHIP or QUARTZ systems)
 - Re-coat in 12-72 hours
- Pigmentable with SPARTACOTE Epoxy Pigments
- Accepts Broadcasts of SPARTACOTE Blended Chip (Flake) or Quartz
- Exceeds ASTM F3010 (<0.1 perms at 16 mils)
Industries