SPARTACOTE SEAL

SPARTACOTE SEAL

SPARTACOTE® SEAL™ is an economical yet functional clear polyaspartic concrete sealer coating system. The application consists of 2 coats of SPARTACOTE® polyaspartic coatings over properly prepared concrete to a CSP 2-3. SPARTACOTE® SEAL™ allows floor owners to easily achieve a wet concrete look, enhancing the colors of the underlying concrete substrate.

Compare SPARTACOTE® SEAL™ Systems

SPARTACOTE SEAL Drawing
System Variation Surface Preparation Overall Thickness Required Materials Applications
SPARTACOTE® SEAL™ Diamond Grind, ICRI CSP 2, 60-100 - grit 8 mils DFT SPARTACOTE® Clear (gloss or low gloss) Widely used in areas requiring above average chemical and abrasion resistance
SPARTACOTE® PURE™ Diamond Grind, ICRI CSP 2, 60-100 - grit 12 mils DFT SPARTACOTE® PURE Clear Green-friendly with minimal odor and very low VOCs. Ideal for indoor applications.

Features & Benefits


  • UV stable
  • Gloss, Satin or Matte Finish
  • Stain resistant
  • Superior durability over acrylic or epoxy based concrete sealers
  • Optimal substrate adhesion
  • Available in a standard as well as minimal odor/VOC-Free version
  • May incorporate floor traction additives for optimal slip resistance
Cured System Properties Sparta-Seal™
Coefficient of Friction (ASTM C-1028) dry: 0.98    wet: 0.83
Hardness (ASTM D 2240) 94
Abrasion Resistance (ASTM D-4060 mg loss) 22-28
Tensile Strength (ASTM D-638,D-2370 psi) 4500-5000
Substrate Adhesion (ASTM D-4541, psi) 400-500+, concrete fracture
Flammability (ASTM D-635) self extinguishing

Applications