FRACTURE BAN™ SC

Prevent cracks from protruding up through your tile or stone installation with FRACTURE BAN SC. This a thin, load bearing, self-curing, liquid applied rubber polymer that can be easily applied in a single coat to form a flexible seamless anti-fracture membrane.

Show More

Find a Distributor
Made in the USA
Microban logo

Features & Benefits

  • Exceeds ANSI A118.12 for anti-fracture protection of up to 1/8” (3 mm), preventing cracks from protruding up through your tile or stone installation. 
  • Wet coat thickness 30 – 40 mils (0.8 – 1.0 mm), only 0.020 – 0.030" (0.5 – 0.8 mm) thick when cured is easy to apply with a paint brush or roller in a single coat. 
  • Rapid drying time allows you to install tile or stone in just 1 to 2 hours
  • Does not require the use of fabric which is less time consuming and saves money
  • Changes from a light blue to darker blue color when cured to clearly indicate when it is ready to install tile or stone
  • “Extra Heavy Service” rating per TCNA performance levels (ASTM C627 Robinson Floor Test) provides you anti-fracture for any tile or stone installation
  • Equipped with Microban® antimicrobial product technology to help prevent the formation of mold or mildew
  • Install tile, brick and stone directly onto the anti-fracture membrane (no need to prime the substrate), saves you time on the installation
 

Product Information

FRACTURE BAN SC is easy and quick to apply for any interior or exterior and horizontal tile or stone installation needing anti-fracture protection. Applied in a single coat with a paint brush or roller, this rapid drying anti-fracture membrane allows you to install tile or stone in just 1-2 hours. 

Equipped with Microban® Anti-Microbial Protection to protect the treated article.

  • Packaging Sizes:

    Commercial Unit: 3.5 gal (13.3 L) pail liquid (36 full units/pallet)

    Mini Unit: 4 x 1 gal (3.8 L) pails of liquid packed in a carton (30 cartons/pallet)

    Coverage:  Commercial Unit: 175 ft² (16.2 m²) - Wet Coat thickness is 30 - 40 mils, 0.03" - 0.04" (0.8 - 1.2 mm) Use wet film gauge to check thickness.

    Mini Unit: 50 ft2 (4.6 ) - Wet Coat thickness is 30 - 40 mils, 0.03" - 0.04" (0.8 - 1.2 mm) Use wet film gauge to check thickness.

     

  • Part of System: LATICRETE®
United States
Canada

Product Data Sheets

Warranties

Marketing Information

Safety Data Sheets

Approvals, Certifications and Environmental

How to Use