HYDRO BAN® Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and damp environments.

Request Product Information

Features & Benefits

Can be used in humid, cold and damp environments.
Allows for flood testing in 30 min. at 70°F (21°C) or higher
Allows for crack isolation up to 1/16” when applied at 30 mils thick, anything over will require the use of fabric within any cove, corner, movement joint and other areas of transition
Bonds directly to metal, PVC and ABS plumbing fixtures only
Thin; only 0.012" (0.3 mm) thick when cured
“Heavy Service” rating per TCNA performance levels (RE: ASTM C627-18 Robinson Floor Test)
Exceeds ANSI A118.10
Exceptionally rapid cure time for quicker time to tile
Non-flammable
Install tile, brick and stone directly onto membrane
Eco-friendly, Low VOC
For gaps 1/16" (1.5 mm) or more see DS 670.4

Product Information

HYDRO BAN Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and damp environments. Quick Cure allows for flood testing within 30 minutes from start of installation allowing contractors to install a shower system all in one day. Designed for both commercial and residential tile installations. Suited for interior substrates, Quick Cure creates a continuous waterproofing barrier with outstanding adhesion. It bonds directly to metal, PVC, stainless steel and ABS drain assemblies.

Packaging Sizes:
1 Gallon (3.8 L) Pail
Part of System: LATICRETE®
Country Availability

United States

Canada

Product Data Sheets