HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners.

Find a Distributor

Request Product Information

Features & Benefits

Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Bonds directly to metal
PVC and ABS plumbing fixtures only
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Changes in color from a light sage to an olive green when cured
Equipped with Microban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane
Rapid drying for a faster time to tile
Install tile. brick and stone directly onto membrane
Exceeds ANSI A118.10 and A118.12
IAPMO approved
Lighter color for ease of inspection
Non-flammable

Product Information

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Product #: 9255-0401-2 / 9255-0005-2 / 9255-1275-2
Packaging Sizes:
Commercial Unit: 5 gal (18.9 L) pail liquid (36 commercial units/pallet)

Mini Unit: 4 x 1 gal (3.8 L) pails of liquid packed in a carton (30 cartons/pallet)
Part of System: LATICRETE®
Country Availability