How do I install LATICRETE® Blue 92 Anti-Fracture Membrane or LATICRETE 9235 Waterproofing Membrane (as an anti-fracture membrane)?
LATICRETE® 9235 Waterproofing Membrane and LATICRETE Blue 92 Anti-Fracture Membrane are a cold-applied, liquid rubber polymers which are used with LATICRETE Waterproofing/Anti-Fracture Fabric. The liquid is applied with a paint roller or paint brush and the fabric is embedded into the liquid until the liquid bleeds through the fabric. A top coat of the membrane liquid is immediately applied over the fabric. LATICRETE LATASIL™ is applied at adjoining surfaces, drains connections and pipe penetrations.
Related Documents:
LATICRETE® 9235 Waterproofing Membrane DS 236.0
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Fabric Reinforced Membrane Installation Instructions DS WPAF.5
How do I install LATICRETE® HYDRO BAN® as an anti-fracture membrane?
LATICRETE® HYDRO BAN® is a cold-applied, liquid rubber polymer which is applied with a paint roller, paint brush or airless paint sprayer. No membrane reinforcing fabric is typically required. The first liquid coat must be completely dry to the touch prior to applying the second coat of membrane liquid. LATICRETE HYDRO BAN will change from a sage green color to an olive green color when dry. The second liquid coat can then be applied and must also dry to the touch. A LATICRETE Latex-fortified thin-set (e.g. 254 Platinum, 257 TITANIUM™, etc...) may be used to install most types of tile or stone directly to the LATICRETE HYDRO BAN. Please refer to the HYDRO BAN data sheet and HYDRO BAN Installation Instructions for more complete information.
Related Documents:
Spraying LATICRETE® HYDRO BAN® TDS 410
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE HYDRO BAN Installation Instructions DS 663.5
LATICRETE HYDRO BAN Installation Video Click Here
What is the coverage of LATICRETE® Blue 92 Anti-Fracture Membrane and LATICRETE 9235 Waterproofing Membrane?
One full unit consisting of 6 gallons (23 liters) of 9235 Waterproofing Membrane liquid and LATICRETE Waterproofing/Anti-Fracture Fabric will cover approximately 300 ft2(27m2).
One mini unit consisting of 2 gallons (7.6 liters) of 9235 Waterproofing Membrane liquid and LATICRETE Waterproofing/Anti-Fracture Fabric will cover approximately 75 ft2 (6.8m2).
Related Documents:
LATICRETE® 9235 Waterproofing Membrane DS 236.0
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Fabric Reinforced Membrane Installation Instructions DS WPAF.5
What is the coverage of LATICRETE® HYDRO BAN® XP and LATICRETE HYDRO BAN;?
One full unit consisting of 5 gallons (19 liters) of HYDRO BAN® XP liquid will cover approximately 250 ft2(23.2m2).
One full unit consisting of 5 gallons (19 liters) of HYDRO BAN® liquid will cover approximately 250 ft2(23.2m2).
One mini unit consisting of 1 gallon (3.8 liters) of HYDRO BAN XP liquid will cover approximately 50 ft2(4.65m2).
One mini unit consisting of 1 gallon (3.8 liters) of HYDRO BAN liquid will cover approximately 50 ft2(4.65m2).
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE® HYDRO BAN® DS 663.0
What substrates can LATICRETE® LATICRETE HYDRO BAN® XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE Blue 92 Anti-Fracture Membrane and LATICRETE FRACTURE BAN™ SC be directly applied to?
Clean, structurally sound concrete, exterior glue plywood (interior only), masonry surfaces, gypsum wallboard (interior only), cement boards and cement plasters. For applications in exterior conditions over occupied areas or applications where tile or stone will be installed over wood-framed decks - see LATICRETE® Plaza and Deck System (DS 290.0).
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN® SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Plaza and Deck System DS 290.0
LATICRETE Drawing ES-F103
How soon can I install LATICRETE® 9235 Waterproofing Membrane or LATICRETE Blue 92 Anti-Fracture Membrane over:
New Concrete - minimum 14 days at 70°F (21°C)
Latex mortar beds - next day at 70°F (21°C)
Leveling or patching materials - allow a full 72 hour cure time at 70°F (21°C).
NOTE: Most importantly for all substrates above; the substrate moisture content must not exceed 5 lbs./1,000 ft2/24 hours (283µg/s•m2) when tested using the Calcium Chloride test (ASTM F1869) or 75% Relative Humidity (RH) when tested with moisture probes (ASTM F2170).
Related Documents:
LATICRETE® 9235 Waterproofing Membrane DS 236.0
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Fabric Reinforced Membranes Installation Instructions DS WPAF.5
How soon can I install LATICRETE® HYDRO BAN® XP or LATICRETE HYDRO BAN over:
New Concrete - minimum 14 days at 70°F (21°C) and NOTE below.
Latex mortar beds - next day at 70°F (21°C) and NOTE below.
Leveling or patching materials - allow a full 72 hour cure time at 70°F (21°C) and NOTE below.
NOTE: Most importantly for all substrates above; the substrate moisture content must not exceed 5 lbs./1,000 ft2/24 hours (283µg/s•m2) when tested using the Calcium Chloride test (ASTM F1869) or 75% Relative Humidity (RH) when tested with moisture probes (ASTM F2170).
Related Documents:
LATICRETE HYDRO BAN XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE HYDRO BAN XP Installation Instructions DS 10003
LATICRETE HYDRO BAN Installation Instructions DS 663.5
What adhesives are acceptable for installing tile over LATICRETE® HYDRO BAN® or LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE Blue 92 Anti-Fracture Membrane, and LATICRETE FRACTURE BAN™ SC?
NOTE: Use LATAPOXY® 300 Adhesive for chemical resistant installations and the installation of moisture sensitive stone. Requires LATICRETE® 9235 Waterproofing Membrane, LATICRETE Blue 92 Anti-Fracture Membrane and LATICRETE FRACTURE BAN™ SC to cure for a full 7 days, or, allow LATICRETE HYDRO BAN® XP or LATICRETE HYDRO BAN to cure for a minimum of 2 hours after the membrane has completely dried to the touch at 70°F (21°C), prior to installing tile or stone.
Adhesive options include:
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATAPOXY® 300 Adhesive DS 633.0
LATICRETE 254 Platinum DS 677.0
LATICRETE 254R Platinum Rapid DS 729.0
LATICRETE 257 TITANIUM™ DS 292
LATICRETE MULTIMAX™ LITE DS 34082
LATICRETE Fabric Reinforced Membranes Installation Instructions DS WPAF.5
LATICRETE HYDRO BAN XP Installation Instructions DS 10003/a>
LATICRETE HYDRO BAN Installation Instructions DS 663.5
If I find air bubbles or blisters in the LATICRETE® HYDRO BAN® XP, LATICRETE HYDRO BAN, 9235 Waterpoofing Membrane, LATICRETE FRACTURE BAN SC, or LATICRETE Blue 92 Anti-Fracture Membrane, what can I do?
Cut out the bubble or blister to sound and well-adhered membrane. Apply a liberal amount of waterproofing membrane liquid over the newly exposed area and overlap 2" to 6" (50mm to 150mm) onto surrounding membrane. If required in the original membrane application (e.g. 9235 Waterproofing Membrane), place the Waterproofing/Anti-Fracture Fabric into the wet liquid and ensure that the liquid bleeds through the fabric. Immediately top coat the area with an additional coat of membrane liquid. Allow to dry to the touch (typically 2 - 4 hours) and then place one more coat of liquid over the area. If flood testing, wait the stated period of time to flood test as stated on the product data sheet (for the membrane used), or, refer to the FAQ shown on this page.
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
Can I use a mastic type adhesive to install tile over LATICRETE® HYDRO BAN™ XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, or LATICRETE Blue 92 Anti-Fracture Membrane?
No. A latex or polymer fortified thin-set adhesive complying with ANSI A118.4 or ANSI A118.15 is required to properly bond tile or stone to a LATICRETE waterproofing and/or anti-fracture membrane. Epoxy adhesives complying with ANSI A118.3 (e.g. LATAPOXY® can also be used over LATICRETE anti-fracture membranes.
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE 15 Premium Mastic DS 286
What is the warranty on LATICRETE® HYDRO BAN® XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, and LATICRETE FRACTURE BAN&trade?
Labor and materials replacement for 25 years from date of installation when using the full LATICRETE System as outlined in the LATICRETE Systems Warranty (DS 025.0); otherwise, every LATICRETE product is backed by a one year product warranty (DS 230.13) when used solely as an individual component of a tile or stone installation, when used with LATICRETE products not listed on the warranty document, or when used with competitor's products. For other warranty options please visit http:www.laticrete.com/architects/warranties.aspx
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
FRACTURE BAN™ DS 155.0
FRACTURE BAN Primer DS 156.0
LATICRETE 25-Year System Warranty DS 025.0
LATICRETE Product Warranty DS 230.13
Will LATICRETE® HYDRO BAN® XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, or LATICRETE Blue 92 Anti-Fracture Membrane control moisture or water from entering the underside of the tile system due to negative hydrostatic pressure or excessive moisture content?
No! LATICRETE® HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane are designed to contain water from the positive side only. The use of these membranes is not recommended where negative hydrostatic pressure or excessive vapor transmission exists. When a moisture vapor reduction membrane is required, use LATICRETE NXT® Vapor Reduction Coating or LATICRETE VAPOR BAN™ Primer ER prior to installation of anti-fracture membrane.
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE NXT® Vapor Reduction Coating DS 507.0
LATICRETE VAPOR BAN™ Primer ER DS 35222.0
What types of sealant are compatible with LATICRETE® HYDRO BAN® XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, or LATICRETE FRACTURE BAN™ SC, LATICRETE Blue 92 Anti-Fracture Membrane?
Use LATICRETE LATASIL™, a neutral cure, 100% silicone sealant which conforms to the following ASTM C920 standards; Type S, Grade NS, Class 25, Use NT, Use I, Use M, Use G. LATICRETE LATASIL also passes ASTM C794 Adhesion Properties.
Related Documents:
LATICRETE® LATASIL™ DS 6200.1
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Fabric Reinforced Membranes Installation Instructions DS WPAF.5
LATICRETE HYDRO BAN XP Installation Instructions DS 10003
LATICRETE HYDRO BAN Installation Instructions DS 663.5
LATICRETE LATASIL Installation Video - Click Here
How do I treat a clamping ring style drain when using LATICRETE® LATICRETE HYDRO BAN® XP, LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane?
You should use a 2-part clamping ring style drain (per ASME 112.6.3). LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane must be installed down into the drain assembly and clamped down between the clamping ring of the drain. Once the waterproofing membrane is dry to the touch, use LATICRETE LATASIL™ and put a continuous bead of sealant between the waterproofing membrane and the clamping ring before bolting down the clamping ring.
Related Documents:
LATICRETE Drawing ES-WP302
LATICRETE® LATASIL™ DS 6200.1 DS 663.0
LATICRETE HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
LATICRETE Fabric Reinforced Membranes Installation Instructions DS WPAF.5
LATICRETE HYDRO BAN XP Installation Instructions DS 10003
LATICRETE HYDRO BAN Installation Instructions DS 663.5
LATICRETE LATASIL Installation Video - Click Here
Can I install vinyl tile over LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane?
Yes - after the LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane is installed, use a latex based vinyl adhesive to adhere the vinyl tile to the membranes. Ensure that the adhesive contains no solvents. If there is a question as to the compatibility of the vinyl adhesive and the membrane, apply a continuous 1/8" (3mm) thick coating of a LATICRETE liquid latex thin-set mortar to the membrane and allow to harden. Then install the vinyl flooring.
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0
Can I install LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane over plywood in exterior applications?
No, LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane are not intended for this installation. You must use the LATICRETE Plaza and Deck System for these applications.
Related Documents:
LATICRETE Drawing ES-F103
LATICRETE Drawing ES-F103b
LATICRETE Plaza and Deck System DS 290.0
Exterior Installation of Tile and Stone Over Occupied Space TDS 157
When can I install tile over LATICRETE HYDRO BAN® XP. LATICRETE HYDRO BAN, LATICRETE 9235 Waterproofing Membrane, LATICRETE FRACTURE BAN™ SC, and LATICRETE Blue 92 Anti-Fracture Membrane?
As soon as the final liquid coat is completely dry to the touch.
Related Documents:
LATICRETE® HYDRO BAN® XP DS 36642
LATICRETE HYDRO BAN DS 663.0
LATICRETE 9235 Waterproofing Membrane DS 236.0
LATICRETE FRACTURE BAN™ SC DS 544
LATICRETE Blue 92 Anti-Fracture Membrane DS 647.0