How do I set up my LATICRETE® STRATA_HEAT WiFi Thermostat with WiFi?

• Using the print/online manual for assistance, use the up and down arrows to select your system type icon.

• Click the tick to confirm selection. • Next, enter the input wattage.

• Click the tick after each number to confirm.

• If at any point you make a mistake, click the “x” to return to the previous step.

• Now select the thermostat application (1-12) using Thermostat Application Table on print/online manual for assistance.

• Click the tick to confirm selection.

• Select the tick to confirm Wi-Fi setup.


How do I peel off the screen protector on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Holding your thermostat in place, pinch the plastic tab in the top right-hand corner.

• Then slowly peel away the plastic protector to reveal the screen.


How do I turn off open window detection on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Click the tick to unlock your thermostat, then again to open the menu.

• Use the arrows to scroll to the settings icon, then tick to open.

• Using the arrows find the open window icon, then tick to open.

• Use the arrows to highlight the cross symbol (off), then tick to confirm turn off.

• Once finished, continuously press the “x” to return to the home screen.

• Select the tick to confirm Wi-Fi setup.


How do I set or cancel an override on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Use the up/down arrows to set a temperature, then click tick to confirm.

• Set a duration for the override using the arrows.

•Choose between the pre-set times, then tick to confirm.

• To cancel the override, simply click the “x”.


How do I set a pin on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Open the menu and select the settings icon.

• Scroll to find the padlock icon, then tick to select (the icon will turn blue).

• Switch the icon from unlocked to locked, then tick to confirm.

• Input a 4-digit code to use as the pin using the arrows.

• Tick to confirm each digit individually.

• Once finished, use the “x” to return to the home screen.

• Wait for your screen to lock, then input the pin to unlock your thermostat.

• Again, using the tick to confirm each digit individually.


How do I change the fixed temperature mode on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Unlock your thermostat and enter mode select.

• Select manual mode (the hand icon) and tick to confirm.

• Alternatively in mode select enter programming mode (the calendar icon), then tick to confirm.


How do I change the setback temperature on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Click the tick to unlock your thermostat, then again to open the menu.

• Select the Program Mode icon in the main menu.

• Then select the Setback Temperature icon.

• Enter the desired setback temperature for the room, then tick to confirm.

• Once finished, continuously press the “x” to return to the home screen.


How do I change the color theme on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• In the main menu select the settings icon.

• Then scroll to select the paint bucket icon.

• Select a color from the options available, then tick to confirm.

• Continuously press the “x” to return to the home screen.

• Now when you alter the temperature your new color theme can be seen.


How do I adjust the brightness on my LATICRETE® STRATA_HEAT WiFi Thermostat?

• Click the tick to unlock your thermostat, then again to open the menu.

• Select the settings icon in the main menu.

• Then select the display brightness icon.

• Use the arrows to select a brightness level between 1 and 10 for each mode.

• You can set a different brightness level for active mode, daytime standby mode and night-time standby mode.

• Once finished, continuously press the “x” to return to the home screen.