HYDRO BARRIER™ Plus
Produit #
HYDRO BARRIER™ Plus is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproofing membrane / crack isolation membrane.
Aperçu du produit
HYDRO BARRIER™ Plus is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproofing membrane / crack isolation membrane. It can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Equipped with Microban® antimicrobial product protection to protect the membrane from the growth of stain and odor causing bacteria, mold and mildew.
Learn about additional waterproofing and crack isolation solutions.
Infos et guides
-
Fiches de données de produit
-
Garanties
-
Informations sur le marketing
-
Fiches de données de sécurité
-
Approbations et certifications
-
Informations sur l’installation
Caractéristiques et avantages
- Allows for flood testing in 12 hours^
- Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
- Changes in color from a light blue to darker blue when cured
- Lighter color for ease of inspection and enhanced visibility during application
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- No additional fabric required
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Exceeds ANSI A118.10 and A118.12
- IAPMO approved
- Equipped with Microban® antimicrobial technology to protect the membrane from the growth of stain and odor causing bacteria, mold and mildew
- Safe—no solvents and non-flammable^When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
Spécifications du produit
Détails
Produit # | 9265-0401-4 / 9265-0035-2 / 9265-0005-2 / 9265-1275-2 |
---|---|
Brevet #(s) | |
Couleurs disponibles | |
Partie du système | LATICRETE® |
Disponibilité par pays | Canada, United States |
Substrates | Béton, Ciment granito, Contreplaqué collé extérieur, Lit de mortier de ciment, Maçonnerie de béton et de briques, Panneau d'appui en ciment, Panneau de gypse, Panneau HYDRO BAN, Plâtre de ciment, Plâtre de gypse, Sous-couche de plâtre coulée, Wall Board |
Dimensions de l’emballage |
5 Gal (19 L) pail liquid (36 full units/pallet) 3.5 Gal (13.3 L) pail liquid (48 full units/pallet) 4 x 1 Gal(3.8 L) pails of liquid packed in a carton (30 cartons/pallet) |